Hi

 

In our last newsletter, we told you about our vibration nozzles. While doing so, we explained various things, such as that the enz® Rotopuls 34 nozzle is based on an eccentrically supported rotor, which produces very fast vibrations and pulsating jets. Today, we'd like to present our rope and chain scrapers to you. In this newsletter, you'll read about the new products and features we have to offer in this product range. But that's not all – you can find many videos showing enz® nozzles at work on our YouTube channel. Find out more about this below.

 

Enjoy your reading!

 

enz® wire rope and chain scrapers are tools that can be used anywhere and are very easy to operate and maintain. Several different pipe diameters can be cleaned with a single tool. They can be used to remove different deposits such as lime scale, cement slurry, roots, etc. cleanly and efficiently. Rope and chain scrapers are ideal for preparation work ahead of renovation with inliners, coatings, or injection grouting; for removing roots, incrustations, and deposits and for removing concrete residues in newly laid channel pipelines.

enz® has improved its much-loved 10.200R in a few areas while still keeping its strong points. One new feature is that this chain scraper now has an application range of up to 500 mm (20 inch) without any negative impact on the stability of the enz® cage. In addition, the plates have now been made harder, which is especially important for very hard deposits. The 10.300R is particularly well-suited for multi-stage root cutting. In addition, it is designed in such a way that it can be used for various pipe materials (in other words, different pipe qualities).

 

The chain lengths are selected to ensure that the ends always scrape against the pipe wall. The only exception is if the work is to be performed in an ovoid profile. Slight to serious root penetration can be removed using the 10.200R standard setting. The 10.300R is an excellent choice for diameters of approximately 300 mm (12 inch) and upwards. It can take care of even the most extreme roots. When working on delicate pipes with large pipe offsets, we recommend that you use the 10.200RS so that there is no danger of the chain becoming jammed.

 

New: The new universal skids can be adjusted in 25 mm (1 inch) increments and also provide the stability needed to remove roots and hard deposits effectively and efficiently.

 

New: The 10.200R and the 10.300R can be pulled with a winch if there is a gradient or if needed. To do so, you will need the pull part pictured.

 

The complete line of enz® chain scrapers covers the full range of sizes from 40 to 1200 and 1500 mm (1.6 to 47 and 59 inch). The 10.800R in particular is the chain scraper to use for very large profiles. Get to know more about the KS400 or the whole KS series with diamant crown.

It is always recommended to mount the wire rope head and use it when working with delicate pipes and when removing rust.

 

The 10.200-series chain scrapers can be equipped with a diamond crown drill bit. It is used to clean pipe inlets, steel anchor bolts and pipelines in channels.

 

Observe the following maintenance routine after each use:
1.    Check the inserts for clogging.
2.    Then check the tool for traces of wear and replace any defective parts.
3.    For corrosion protection and care, treat the tool with OIL SPRAY BIO.

The nozzle inserts must be inspected regularly. Nozzle wear and tear will depend on the level of contamination in the water used. If recycled water is being used, the nozzle inserts must be inspected daily and cleaned if necessary. Before long periods of non-use, spray the nozzle holes and the connecting threads with OIL SPRAY BIO.

 

For some time now, we have been regularly publishing videos about our products or our company on our YouTube channel. Product videos have the advantage of quickly and easily showing how a tool works in a pipe. Alongside new products and features, you can also find videos on our current range of products.

 

We recommend that you subscribe to our YouTube channel so that you are always up-to-date with our latest product videos. Then you'll be notified as soon as a new enz® video is online. This means you won't ever miss a new video and will have the chance to be one of the first to share the video on your Facebook, Twitter, LinkedIn or other profile or to embed it on your website.

 

 

Subscribe to our YouTube channel today!

 

We hope that you continue to enjoy using our enz® products safely and successfully. Our customer service department is available for your questions Monday to Friday from 8 a.m. to 12 p.m. and 1:30 p.m. to 5 p.m. (Friday until 4 p.m.).